How to Find the Right Replacement Hot Tub Filter
Know your hot tub, or measure four things on the old filter.
Most filters can be matched by hot tub model in seconds. If the model is a mystery, a tape measure and the old filter do the job just as well.
Start with your hot tub model
Every filter page on our site lists the hot tubs it fits.3 Here are the filters for the most common models.
| Hot tub | Filter | Price |
|---|---|---|
| Outdoor Living Harmony, Comfort, Lagoon, Look, Mist and Active swim spas | See the filter | £19.99 |
| Outdoor Living Serenity, Haven, Retreat and Sanctuary | See the filter | £19.99 |
| Outdoor Living Fun, Life, Style, Island and Tradition | See the filter | £24.99 |
| Outdoor Living Refresh | See the filter | £29.99 |
| Jacuzzi J300, J400, J500 and JLX | See the filter | £29.99 |
| Jacuzzi Lodge M | See the filter | £24.99 |
| Sundance 680 series, 2006 on | See the filter | £26.99 |
For other Jacuzzi and Sundance models, swim spas and other brands, open the brand at the top of our hot tub filters page.
Measure the old filter
Take the filter out with the power off, rinse it and let it dry, then take four readings in centimetres.
Length
Measure the full length from end to end, including the end caps but not any handle.1 On our filters page this is the Height filter.
Width
Measure the outside diameter across the widest part of the pleats.1
Top hole
If the top is open, measure across the inside of the hole.1 Some filters have a closed top with a handle instead.
Then set Height, Width, Top hole width, Bottom hole width and Thread type on our filters page, and the list narrows to the filters that match.2 If you know the filter's reference code, such as a Pleatco number, you can pick it in the Reference code filter too.2
Still not sure? Call us on 01482 212322 with your measurements and we'll find the one that fits.
Quick answers
Open a question to read the answer.
How do I know which filter fits my hot tub?
Start with your hot tub make and model: each filter page lists the hot tubs it fits. If you don't know the model, measure the old filter's length, width, top hole and bottom hole, check the thread, and match those on our filters page.
Which filter fits an Outdoor Living Harmony, Comfort or Lagoon?
They all take the same filter, a Pleatco PWW50 compatible filter, which also fits the Look, Mist and Active swim spas.
How do I measure a hot tub filter?
Measure the length including the end caps but not the handle, the outside diameter, and the inside of the top and bottom holes. Then check whether the thread is male or female.
What if I can't find my filter?
Call us on 01482 212322 with your hot tub make and model, or the old filter's measurements, and we'll find the one that fits.
Rather we did it for you?
Our own service team visits hot tubs across Great Britain. Book online, then we call you to pick a date.
-
Annual hot tub serviceA 32-point check, a drain and clean, and a photo report. About two hours.
£179View service
-
Drain, clean and fillDrained, cleaned inside and out, and refilled ready to heat. Ideal every 3 to 4 months.
£129View service
-
Drain and winteriseDrained and readied for the cold, so water left in the pipes and pumps cannot freeze.
£129View service











