Hot Tub Cover for Jacuzzi Lodge L
Regular price £399.00
Unit price
Outdoor Living DuraShield™ replacement cover
Replace your Lodge cover with the right fit
When a worn cover leaves your spa exposed to weather and heat loss, the right-size replacement helps protect the water between uses. This DuraShield™ cover is made for Jacuzzi Lodge L hot tubs, measures 223 × 211 cm and includes a set of new cover clips.
Sized for your Lodge spa
Made to fit Jacuzzi Lodge L hot tubs and measures 223 × 211 cm.
Easier to lift and replace
The solution-dyed polyester outer fabric is lighter than traditional vinyl, helping make routine handling easier.
Protection from rain and sun
The waterproof, UV-resistant outer fabric helps protect the cover during outdoor use.
Helps hold water warmth
A 1.5 lb high-density foam core and heat-sealed underside help limit heat loss between uses.
Support to help hold its shape
Galvanised steel C-channels reinforce the foam core, while a vapour barrier helps protect the core from moisture.
Reinforced to close securely
Double-stitched seams, 40 reinforcement points and three reinforced locking straps with buckles help secure the cover. A set of cover clips is included.
What you need to know
| Compatible model | Jacuzzi Lodge L |
|---|---|
| Cover dimensions | 223 × 211 cm |
| DuraShield construction | Four-layer cover system |
| Outer fabric | Solution-dyed polyester; waterproof and UV-resistant |
| Insulation | 1.5 lb high-density foam |
| Core support | Galvanised steel C-channels |
| Core protection | Vapour barrier |
| Seams and reinforcement | Double-stitched seams with outdoor-specific, UV-resistant thread; 40 reinforcement points |
| Fastening | Three reinforced locking straps and buckles |
| Included | A set of new cover clips |
Care: Clean with mild soap and a soft brush, then rinse and dry the cover thoroughly.
The right cover for your Lodge L
Made to fit the Jacuzzi Lodge L, so it sits right first time. Four layers, a steel-reinforced foam core and a fabric that doesn't soak up water, with clips included.
- 223 × 211cm
- Cover size
- 4
- Layers, DuraShield™ system
- 3
- Reinforced locking straps
- 40
- Reinforcement points
Will it fit my hot tub?
This cover is made for the Jacuzzi Lodge L. It's cut to that tub's shape, so you don't need to measure anything.
- Check your modelThe Lodge M cover is 200 × 190cm. The Lodge L cover is 223 × 211cm.
- Pick your sizeChoose the cover that matches your Lodge, and add it to your basket.
- Not sure? Ask usSend a photo of your tub or its serial plate and we'll confirm.
Happy to double-check for you: call 01482 212322 or email a photo of your tub with its make and model. Looking for another Lodge cover? Lodge M cover.
Built in four layers, not one
The DuraShield™ system. Each layer does one job, and together they keep the cover light, warm and dry for years.
- 1
Solution-dyed fabric
The colour is locked into the fibres, so it resists fading, cracking and mildew. It's also around 30% lighter than traditional vinyl.
Standard vinyl is heavy and tends to crack under UV over time.
- 2
Heavy-duty vapour barrier
Wraps the whole core so water can't soak in. The cover stays light and keeps its insulation.
A poor seal is the most common reason covers get waterlogged and heavy.
- 3
Galvanised steel C-channels
Set inside the foam so the cover carries the weight of rain or snow without sagging.
Weaker aluminium supports can bend and sag under load.
- 4
High-density foam core
1.5lb foam made to hold heat in the water, which helps keep running costs down.
Cheaper covers use lower-density foam that lets heat through.
Where your heat goes
Most of the heat in a hot tub escapes through the top of the water. A snug, well-insulated cover holds it in, so the heater has less to do.
- Warm underneathDense foam and a sealed core keep the heat where you want it.
- Dry on topThe fabric sheds rain and the vapour barrier stops water getting into the foam.
- Strong in bad weatherSteel C-channels stop it sagging under rain or snow.
Easy on, easy off
Reinforced locking straps hold it down once it's on, and a set of cover clips is included.



Delivery
In stock and sent out from us, with nationwide delivery. Dispatched the next working day.
- Nationwide deliverySent to you wherever you are in the UK.
- Dispatched next working dayWhen it's showing in stock on this page.
- Visit a showroomOur showrooms are open seven days a week if you'd like to see a cover in person.
Full specifications
Everything about this cover in one place.
Size and fit
- Cover size
- 223 × 211cm
- Made for
- Jacuzzi Lodge L
Materials and build
- Fabric
- Solution-dyed polyester, waterproof and UV-resistant
- Foam core
- 1.5lb high-density foam
- Support
- Galvanised steel C-channels
- Vapour barrier
- Protects the core from moisture
- Seams
- Double-stitched with UV-resistant thread, 40 reinforcement points
Fixings and finish
- Fixings
- Three reinforced locking straps and buckles
- Included
- A set of new cover clips
- Colour
- Black
- Model code
- OL223X211C
Questions we get asked
Can't see your question? Call 01482 212322 and we'll help.
Will this fit my Jacuzzi Lodge L?
Yes. It's made for Jacuzzi Lodge L hot tubs and measures 223 × 211cm. If you're not sure whether you have a Lodge M or a Lodge L, send us a photo or the serial plate and we'll tell you.
Which Lodge do I have?
The Lodge M cover is 200 × 190cm and the Lodge L cover is 223 × 211cm. Measure the top of your tub, or ask us and we'll check against your model.
Do the cover clips come with it?
Yes. A set of new cover clips is included, along with three reinforced locking straps and buckles.
What is it made of?
A solution-dyed polyester outer fabric that's waterproof and UV-resistant, over a 1.5lb high-density foam core with galvanised steel C-channels and a vapour barrier.
How do I clean it?
Wipe it with mild soap and a soft brush, then rinse and dry it thoroughly.
Our Happy Customers
Technical Details
Complete specifications for your cover
- Compatible Model
- Jacuzzi Lodge L
- Dimensions
- 223cm x 211cm
- Material
- Solution-dyed polyester outer fabric; 1.5 lb high-density foam; galvanised steel C-channels; vapour barrier.
- Weather Resistance
- Solution-dyed polyester outer fabric is waterproof and UV-resistant for outdoor use.
- Compatibility
- Designed to fit Jacuzzi Lodge L hot tubs.







