How to Clean Hot Tub Pipes
Clean the pipes every time you change the water.
The plumbing you never see carries every drop through the jets and filter. A pipe cleaner lifts the soap, oils and scale from inside it, so the fresh water starts clean.
Why the pipes need cleaning
Over time, soap scum, oil deposits and scale build up inside the pipework and fittings.13 A hot tub pipe cleaner is made to lift them out of the plumbing, so they leave with the old water rather than meeting the new.12
It works alongside your usual sanitiser: our pipe cleaners can be used with chlorine or bromine.12
Use a pipe cleaner at every water change.12 Our pipe cleaner labels recommend doing this about every three months, and our cleaning schedule pairs it with a drain, refill and clean of the shell each quarter.14
It is a good moment for the filter too: while the hot tub is empty, give it a full clean with our guide on how to clean a hot tub filter.
How to clean hot tub pipes, step by step
Balance the fresh water
Test the new water and bring it into range. Our testing guide and chemical chart show you how.
Using Swirl Away? Pour half a bottle into the full, hot water and run the hot tub for an hour without the air on, then drain and rinse before you refill.3
Pipe cleaners we stock

Hot Tub Flush Filter and Pipe Cleaner, 500 ml
£9.99
Our own pipe cleaner, odourless and made for every water change.

Jacuzzi® Hot Tub Pipe Cleaner Liquid, 500 ml
£11.99
Cleans pipework and fittings, and works alongside chlorine or bromine.

Swirl Away Hot Tub Pipe Cleaner Liquid, 500 ml
£12.99
Lifts scale, soap and sediment; half a bottle per clean.
See all filter and pipe cleaners, or the 5 litre Jacuzzi® pipe cleaner for commercial hot tubs.
Quick answers
Open a question to read the answer.
How often should I clean my hot tub pipes?
At every water change. Our pipe cleaner labels recommend about every three months.
How long do I leave pipe cleaner in a hot tub?
Run the jets for 30 minutes, then leave it for another 30 minutes for a quick clean, or 12 hours or overnight for a thorough clean, before you drain.
Do I add pipe cleaner before or after draining?
Before. Add it while the hot tub is still full, run the jets, let it work, then drain to flush out the debris.
Can I use pipe cleaner with chlorine or bromine in the water?
Yes. Our pipe cleaners can be used alongside chlorine or bromine.
Do I need to rinse after using pipe cleaner?
Yes. Drain the hot tub, rinse it with clean water, then refill and balance the fresh water.
Sources
- Outdoor Living, Hot Tub Flush Filter and Pipe Cleaner 500 ml product page, viewed 12 November 2026
- Jacuzzi, Hot Tub Pipe Cleaner Liquid 500 ml product page, sold by Outdoor Living, viewed 12 November 2026
- Swirl Away, Hot Tub Pipe Cleaner Liquid 500 ml product page, sold by Outdoor Living, viewed 12 November 2026
- Outdoor Living, Hot Tub Surface Cleaner product page: cleaning schedule, viewed 12 November 2026
Rather we did it for you?
Our own service team visits hot tubs across Great Britain. Book online, then we call you to pick a date.
-
Drain, clean and fillDrained, cleaned inside and out, and refilled ready to heat. Ideal every 3 to 4 months.
£129View service
-
Annual hot tub serviceA 32-point check, a drain and clean, and a photo report. About two hours.
£179View service
-
Drain and winteriseDrained and readied for the cold, so water left in the pipes and pumps cannot freeze.
£129View service











