How to Test Hot Tub Water
Dip for 2 seconds, read at 15, and test before every soak.
A test strip tells you your sanitiser, pH and alkalinity in one go. Here is how to take a reading you can trust, what each number should be, and what to do when one is out.
How to test, step by step
Take one strip
Take a strip from the pack and keep the others dry, so they stay ready for next time.3
Dip it for 2 seconds
Dip the strip into the hot tub water for 2 seconds.2
Pads up, shake once
Lift it out with the pads facing up and give it one shake to remove the excess water.2
Read it at 15 seconds
After 15 seconds, match each pad against the colour chart on the back of the pack.2
Adjust, then test again
If a reading is out of range, add the product it calls for, give it time to mix, and test again. Our hot tub chemical chart shows what to add for each reading.
When to test
The CDC advises testing chlorine and pH at least twice a day, and more often when lots of people are using the hot tub.1 Strip makers recommend a daily test whether the hot tub is in use or not.2
The simplest habit is to test before you get in. That way you know the water is ready, and you can top up before anyone soaks.
Test again after you add chemicals, once they have had time to mix. Our chlorine routine and bromine routine set out a full week.
What the readings should be
| Reading | Aim for | If it is low | If it is high |
|---|---|---|---|
| pH | 7.2 to 7.63 | pH increaser | pH reducer |
| Total alkalinity | 80 to 120 ppm3 | Alkalinity increaser | See the pH guide |
| Chlorine level | 3 to 5 ppm3 | Chlorine granules | Let it fall back to 5 ppm before you soak4 |
| Bromine | 4 to 6 ppm4 | Bromine granules | See the bromine routine |
| Active oxygen | 5 to 10 mg/l5 | Oxygen tablet | See the oxygen routine |
Read the row for the sanitiser you use: chlorine, bromine or active oxygen. Use one sanitiser, never a mix. Your strip pack may call the chlorine reading free chlorine: the chlorine still active in the water.
Strips or a tablet kit?
Strips are the quickest everyday test: one dip reads your sanitiser, pH and total alkalinity.2 The LaMotte Insta-Test 5 Plus adds total chlorine and total hardness.6 If you use active oxygen, choose strips made for it.7
A tablet kit takes a little longer and gives a reading by colour: fill the chambers with hot tub water, add a tablet, and compare the colour with the scale.8 The CDC notes that strips are less accurate than a tablet test kit, so a tablet kit is a good way to confirm a reading.1 Whichever you use, follow the directions on the pack.1

3-in-1 Pool/Hot Tub Test Strips
£4.99
Our own strips for chlorine or bromine, pH and alkalinity. Pack of 50.
See every option in hot tub test strips and kits.
Quick answers
Open a question to read the answer.
How often should I test my hot tub water?
Test before you get in. The CDC advises testing chlorine and pH at least twice a day, and more often when the hot tub is busy.
How long do hot tub test strips take?
Dip the strip for 2 seconds, shake once with the pads facing up, and read it against the colour chart after 15 seconds.
What should I test my hot tub water for?
Your sanitiser (chlorine, bromine or active oxygen), pH and total alkalinity. Aim for pH 7.2 to 7.6 and total alkalinity 80 to 120 ppm.
Are hot tub test strips accurate?
They are the quickest everyday test. The CDC notes that a tablet test kit is more accurate, so a tablet kit is a good way to confirm a reading.
Which test strips do I need for bromine?
Choose strips that read bromine, such as the Jacuzzi® bromine test strips or our 3-in-1 strips, which read chlorine or bromine, pH and total alkalinity.
Sources
- Centers for Disease Control and Prevention, Home pool and hot tub water treatment and testing, updated 10 May 2024
- Outdoor Living, 3-in-1 Pool/Hot Tub Test Strips product page, viewed 12 November 2026
- Jacuzzi, Hot Tub Chlorine Test Strips product page, sold by Outdoor Living, viewed 12 November 2026
- HealthLinkBC, Residential hot tubs and pools: safe water quality, 1 August 2024
- Jacuzzi, Hot Tub Oxygen Tablets product page, sold by Outdoor Living, viewed 12 November 2026
- LaMotte, Insta-Test 5 Plus test strips product page, sold by Outdoor Living, viewed 12 November 2026
- Jacuzzi, Hot Tub Oxygen Water Test Strips product page, sold by Outdoor Living, viewed 12 November 2026
- Lovibond, PoolTester chlorine and pH testing kit product page, sold by Outdoor Living, viewed 12 November 2026
Rather we did it for you?
Our own service team visits hot tubs across Great Britain. Book online, then we call you to pick a date.
-
Drain, clean and fillDrained, cleaned inside and out, and refilled ready to heat. Ideal every 3 to 4 months.
£129View service
-
Annual hot tub serviceA 32-point check, a drain and clean, and a photo report. About two hours.
£179View service
-
Drain and winteriseDrained and readied for the cold, so water left in the pipes and pumps cannot freeze.
£129View service














