Jacuzzi® Hot Tub Chlorine Test Strips - Pack of 50

Features we love

• 3-way chlorine test strips for hot tubs, spas & more
• Check chlorine, pH and Total Alkalinity levels daily
• Easy to use & check against colour scale on pack
• Only 15 seconds to develop an accurate reading
• With 50 test strips per pack
• Jacuzzi® premium quality you can trust

All about me

Jacuzzi‘s test strips check the current chlorine, pH and Total Alkalinity levels in your hot tub or spa water. The results identify the chemicals you need to add to regulate them. Use them daily or before using your hot tub or spa.

They’re super easy to use; just take a strip from your pack, be careful not to get the others wet, dip into your water for a couple of seconds, wait for it to develop, then check against the colour scale on your pack. Experience the Jacuzzi® difference for yourself.

Need to know

Tests for:

• Active chlorine
• pH
• Total alkalinity 

How to use

Take a strip from your pack, be careful not to get the others wet, dip into your water for a couple of seconds, wait for it to develop, then check against the colour scale on your pack. Use test strips daily.

A chlorine level between 3-5 ppm, pH level between 7.2-7.6 and Total Alkalinity level between 80-120ppm must be maintained in your hot tub/spa at all times.

FAQs

How often should I test my hot tub water?

We recommend you test your hot tub water daily whether your spa is in use or not.

What should hot tub water be tested for?

Test your hot tub’s water for sanitiser levels - whether that’s chlorine, bromine or oxygen - along with pH and total alkalinity. This then allows you to make any chemical adjustments that may be required.

What is the best way to test hot tub water?

For quick and accurate detection, we recommend using test strips to check the levels of your water.

How long after shocking a hot tub can you test the water?

There is no set time to wait before using your hot tub. All brands give different recommendations, ranging from 20 minutes to 24 hours. However, before donning your swimsuit and stepping inside, we suggest using a test strip to ensure your chlorine levels are safe.

Top tip: Non-chlorine shock treatments don't sanitise the water. This means you can usually use your hot tub after approximately 20 minutes of adding the chemical.

If you need more advice on keeping your tub water sparkling fresh, read our hot tub maintenance guide.